Lebra

▲ Click on the Manufacturer Logo above to shop for  Auto Accessories ▲

• Covercraft Low Profile Rail System - Available in "Zip&GO" or traditional Snap-style, this low profile tonneau looks sharp and includes lots of features to make it one of the best systems you can choose for your truck. 
  Either version allows easy access anywhere around the truck bed, and straps at the front of the cover secure the rolled tonneau if full bed use is needed.
  

• Covercraft Rail System - Our most popular style, rail system tonneaus use a full perimeter aluminum frame that is clamped to the top of the bed (no drilling, glue or screws).  Covercraft's rail system uses patented hidden fasteners to hold the tonneau onto the rails. 
   
                           
  

Covercraft Low Profile Rail System Tonneau

Continuous Security Channel with Low Profile Styling

Covercraft's low profile rail system tonneau can be ordered in either a Zip&GO! style, which provides a continuous full-bed seal, or a traditional "Snap" style with snap heads that are adjustable, to provide a tighter fit when needed.  Both styles of tonneau covers use the same frame system and heavy-duty, non-shrink, textured vinyl tonneau fabric.  You can access the bed from the front or the back with either style, and the tailgate operates normally when the tonneau is in place. 
The low-profile design looks great on any pickup.

• Full perimeter anodized aluminum frame installs easily without drilling, adhesives or tools.
• Zip&GO! tonneau features a durable Santoprene extrusion that is pressed into a security channel in the rails.  This creates a smooth, continuous seal around the entire pickup.  It's easy to operate in all weather conditions, simply zip.....and go!
• "Snap" tonneau covers use a unique molded snap base that slides into the rail security channels.  The snap base can be inserted two different ways to help tension the tonneau, if required.
• Both tonneau covers use super stable vinyl coated woven polyester/fiberglass for long life and minimal weather shrinkage and expansion.  This material is a little more expensive, but in the long run well worth it, as it holds it shape during summer heat and winter cold.
• Special security strap allows tonneau to be secured to the front rail and locked in place (lock not supplied).
• Corners feature a nylon "security tab" that fits into a slot in the corner connector.  This helps prevent the corner of the cover from lifting.
• Clamps install easily without tools.  The arched bows aid rain run-off and rest on top of the clamps (except Sportside & Flareside) for maximum support.
• Tonneau cover can be rolled up to the cab and secured with straps (included) when full bed access is needed.
• Rail system and hardware is warranted to original owner for the life of the vehicle, and the vinyl tonneau cover is warranted against becoming unserviceable for three (3) years.

Covercraft Rail System Tonneau Covers

Easy One-Person Installation - Requires only a 1/2" or 9/16" wrench or socket.  (Flareside and Stepside models require additional tools.)
Helps Increase Gas Mileage - By eliminating wind drag in the bed of the pickup.
Patented Hidden Fastener - Fits into rail - no buttons or snaps to line up, just press in at any location.  Sewn in place over a 4 inch area to reduce stress on the tonneau fabric.
Custom Patterned - Designed to fit specific applications. 
Lifetime Warranty - Based on normal use, on anodized aluminum frame, bows, clamps and fasteners.
Slip-Joint Corners - Allow easy removal of back rail for loading bulky items in bed.
Tailgate Opens Normally - No need to remove tonneau for easy bed access.
Saddle Bow-Ends - Securely snap in place over clamps and aid in rain run off.
One-Piece Side Rail Design - For easy installation and strength (shown with an unsewn fastener).
Durable Corner Pins - Secure the front and rear rails and are easily removed for full bed access.
Removal "Key" - Fits on key ring to allow easy tonneau removal in any weather.

• Covercraft Hook & Loop Tonneau Covers  - Vinyl custom-fit and Ready-Fit tonneau covers protect bed contents and are a great value.

  • Self-adhesive, press-on hook strips adhere firmly around the top outer edge of the truck bed.
  • Cover is one-piece construction using tough vinyl coated polyester fabric.
  • Aluminum mounting channel installed at the front of the bed allows the tonneau to be easily removed or rolled up and held in place with tie-straps (included).
  • Custom-fit patterns have tailored, rounded corners.

  Ready-Fit series material color available - Black only
  Custom-fit series material colors available - Black, Gray, Tan

Lebra